Standard Curving Conveyor | Span Tech Conveyors
standard-conveyors

Standard Curving Conveyors

One of the most unique features of Span Tech’s family of conveyors is the horizontal curve conveyors.

With one of the tightest turning radii in the industry. Our Standard Curved conveyors can be manufactured to any degree angle at any radius staying within the design rules *.

The MultiSpan 25mm chains require from the end of the horizontal curve to the end of a drive or idler; there should be a straight section with a length that is greater than or equal to the chain width. The MultiSpan 50mm chains require from the end of the horizontal curve to the end of a drive or idler; a straight section with a length that is greater than or equal to the chain width.  Any Span Tech conveyor requires at least two times the chain width between opposing curves.

* 25mm Super Tight minimum centerline bend radius = Chain Width *2.29 – 2.64

* 50mm Super Tight minimum centerline bend radius = Chain Width *1.93

* MultiSpan minimum centerline bend radius = Chain Width * 3.12

Start Your Estimate